1928nash

Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 1928nash
    Participant

      You already have the most important tool of all – the internet, you can learn anything from Utube. It will take ingenuity and persistance and working out ways to get the answers to each problem in turn. Go on the net and go to Schrodingers Box and look up the videos that deal with your problem. Do the same thing with Scanner Danner. Buy the E book from Danner and you will find that it has links imbedded that will give you access to specific videos that will let you chase that item you will want to know about. So far you have have had to spend much money to get this point.
      If I was in your shoes I would pay the monthly subscription to both Schrodinger Box and Scanner Danner, remember and never forget – Knowledge is Power and Power is Control. Not having the specialist gear can be overcome by Knowledge. Best of luck, be stubborn and get the Knowledge and persist, you will win in the end.

      1928nash
      Participant

        You already have the most important tool of all – the internet, you can learn anything from Utube. It will take ingenuity and persistance and working out ways to get the answers to each problem in turn. Go on the net and go to Schrodingers Box and look up the videos that deal with your problem. Do the same thing with Scanner Danner. Buy the E book from Danner and you will find that it has links imbedded that will give you access to specific videos that will let you chase that item you will want to know about. So far you have have had to spend much money to get this point.
        If I was in your shoes I would pay the monthly subscription to both Schrodinger Box and Scanner Danner, remember and never forget – Knowledge is Power and Power is Control. Not having the specialist gear can be overcome by Knowledge. Best of luck, be stubborn and get the Knowledge and persist, you will win in the end.

        in reply to: Puzzling fuel pressure drop – Buick 3800 V6 #284225
        1928nash
        Participant

          Try relating the MAP (Manifold Absolute Pressure) to your problem

          1928nash
          Participant

            Do you have a Scan Tool or any diagnostic equiptment????????????

            in reply to: Citroen Xsara Picasso 04 – Crank, no start #282387
            1928nash
            Participant

              I must start out by saying that I’ve never seen a Citreon of your type; so anything I say is guesswork. Even though you don’t show a code for the Crank Shaft Posistion Sensor, are you getting a signal from it to the ECU ??? More to that if you are getting a pulse signal, is it getting to the ECU.

            Viewing 5 posts - 1 through 5 (of 5 total)